The Basilica di Santa Maria del Fiore is the cathedral church (Duomo) of Florence, Italy, begun in 1296 in the Gothic style to the design of Arnolfo di Cambio and completed structurally in 1436 with the dome engineered by Filippo Brunelleschi. The exterior of the basilica is faced with polychrome marble panels in various shades of green and pink bordered by white and has an elaborate 19th century Gothic Revival facade by Emilio De Fabris.
The cathedral complex, located in Piazza del Duomo, includes the Baptistery and Giotto's Campanile. The three buildings are part of the UNESCO World Heritage Site covering the historic centre of Florence and are a major attraction to tourists visiting the region of Tuscany. The basilica is one of Italy's largest churches, and until the modern era, the dome was the largest in the world. It remains the largest brick dome ever constructed.
The cathedral is the mother church of the Roman Catholic Archdiocese of Florence, whose archbishop is currently Giuseppe Betori.
Contents |
The Basilica di Santa Maria del Fiore was built on the site of an earlier cathedral dedicated to Santa Reparata.[1][2] The ancient building, founded in the early 5th century, and having undergone many repairs, was crumbling with age as attested in the 14th century Nuova Cronica of Giovanni Villani,[3] and was no longer large enough to serve the growing population of the city.[3] Other major Tuscan cities had undertaken ambitious reconstructions of their cathedrals during the Late Medieval period, as seen at Pisa and particularly Siena where the enormous proposed extensions were never completed.
The new church was designed by Arnolfo di Cambio and approved by city council in 1294. Arnolfo di Cambio was also architect of the church of Santa Croce and the Palazzo Vecchio. He designed three wide naves ending under the octagonal dome, with the middle nave covering the area of Santa Reparata. The first stone was laid on September 9, 1296 by Cardinal Valeriana, the first papal legate ever sent to Florence. The building of this vast project was to last 170 years, the collective efforts of several generations and Arnolfo's plan for the eastern end, although maintained in concept, was greatly expanded in size.
After Arnolfo died in 1302, work on the cathedral slowed for the following thirty years. The project obtained new impetus, when the relics of San Zenobius were discovered in 1330 in Santa Reparata. In 1331, the Arte della Lana (Guild of Wool Merchants) took over exclusive patronage for the construction of the cathedral and in 1334 appointed Giotto to oversee the work. Assisted by Andrea Pisano, Giotto continued along di Cambio's design. His major accomplishment was the building of the campanile. When Giotto died in 1337, Andrea Pisano continued the building until work was again halted due to the Black Plague in 1348.
In 1349 work resumed on the cathedral under a series of architects, commencing with Francesco Talenti, who finished the campanile and enlarged the overall project to include the apse and the side chapels. In 1359 Talenti was succeeded by Giovanni di Lapo Ghini (1360–1369) who divided the center nave in four square bays. Other architects were Alberto Arnoldi, Giovanni d'Ambrogio, Neri di Fioravante and Orcagna. By 1375 the old church Santa Reparata was pulled down. The nave was finished by 1380, and by 1418 only the dome remained incomplete.
In 1419, the Arte della Lana held a structural design competition for the dome. The two main competitors were Lorenzo Ghiberti (famous for his work on the "Gates of Paradise" doors at the Baptistery) and Filippo Brunelleschi who was supported by Cosimo de Medici, with Brunelleschi winning and receiving the commission.[4]
Ghiberti, appointed coadjutator, was drawing a salary equal to Brunelleschi's and would potentially earn equal credit, while spending most of his time on other projects. When Brunelleschi became ill, or feigned illness, the project was briefly in the hands of Ghiberti. But Ghiberti soon had to admit that the whole project was beyond him. In 1423 Brunelleschi was back in charge and took over sole responsibility.[5]
Work started on the dome in 1420 and was completed in 1436. The cathedral was consecrated by Pope Eugene IV on March 25, 1436 (the first day of the year according to the Florentine calendar). It was the first 'octagonal' dome in history to be built without a wooden supporting frame (The Roman Pantheon, a circular dome, was built in 117–128 A.D. with support structures). It was one of the most impressive projects of the Renaissance. During the consecration service in 1436, Guillaume Dufay's similarly unique motet Nuper rosarum flores was performed. The structure of this motet was strongly influenced by the structure of the dome.
The decoration of the exterior of the cathedral, begun in the 14th century, was not completed until 1887 when the polychrome marble facade was completed to the design of Emilio De Fabris. The floor of the church was laid in marble tiles in the 16th century.
The exterior walls are faced in alternate vertical and horizontal bands of polychrome marble from Carrara (white), Prato (green), Siena (red), Lavenza and a few other places. These marble bands had to repeat the already existing bands on the walls of the earlier adjacent baptistery the Battistero di San Giovanni and Giotto's Bell Tower. There are two lateral doors, the Doors of the Canonici (south side) and the Door of the Mandorla (north side) with works of art of Nanni di Banco, Donatello, and Jacopo della Quercia. The six lateral windows, notable for their delicate tracery and ornaments, are separated by pilasters. Only the four windows closest to the transept admit light; the other two are merely ornamental. The clerestory windows are round, a common feature in Italian Gothic.
During its long history, this cathedral has been the seat of the Council of Florence (1439), heard the preachings of Girolamo Savonarola and witnessed the murder of Giuliano di Piero de' Medici on Sunday, 26 April 1478 (with Lorenzo Il Magnifico barely escaping death) in the Pazzi conspiracy.
Florence Cathedral is built as a basilica, having a wide central nave of four square bays, with an aisle on either side. The chancel and transepts are of identical polygonal plan, separated by two smaller polygonal chapels. The whole plan forms a Latin cross. The nave and aisles are separated by wide pointed Gothic arches resting on composite piers.
The dimensions of the building are enormous: length 153 metres (502 ft), width 38 metres (124 ft), width at the crossing 90 metres (295 ft). The height of the arches in the aisles is 23 metres (75 ft). The height from pavement to the opening of the lantern in the dome is also 90 metres (295 ft).
By the beginning of the fifteenth century, after a hundred years of construction, the structure was still missing its dome. The basic features of the dome had been designed by Arnolfo di Cambio in 1367. His brick model, 4.6 metres (15 ft) high 9.2 metres (30 ft) long, was standing in a side isle of the unfinished building, and had long ago become sacrosanct.[6] It called for an octagonal dome higher and wider than any that had ever been built, with no external buttresses to keep it from spreading and falling under its own weight.
The commitment to reject traditional Gothic buttresses had been made when Neri di Fioravante's model was chosen over a competing one by Giovanni di Lapo Ghini.[7] That architectural choice, in 1367, was one of the first events of the Italian Renaissance, marking a break with the Medieval Gothic style and a return to the classic Mediterranean dome. Italian architects regarded Gothic flying buttresses as ugly makeshifts, in addition to being a style favored by central Italy's traditional enemies to the north.[8] Neri's model depicted a massive inner dome, open at the top to admit light, like Rome's Pantheon, but enclosed in a thinner outer shell, partly supported by the inner dome, to keep out the weather. It was to stand on an unbuttressed octagonal drum. Neri's dome would need an internal defense against spreading (hoop stress), but none had yet been designed.
The building of such a masonry dome posed many technical problems. Brunelleschi looked to the great dome of the Pantheon in Rome for solutions. The dome of the Pantheon is a single shell of concrete, the formula for which had long since been forgotten. A wooden form had held the Pantheon dome aloft while its concrete set, but for the height and breadth of the dome designed by Neri, starting 52 metres (171 ft) above the floor and spanning 44 metres (144 ft), there was not enough timber in Tuscany to build the scaffolding and forms.[9] Brunelleschi would have to build the dome out of bricks, and with nothing under it during construction. To illustrate his proposed structural plan, he constructed a wooden and brick model with the help of Donatello and Nanni di Banco and still displayed in the Museo dell'Opera del Duomo. The model served as a guide for the craftsmen, but was intentionally incomplete, so as to ensure Brunelleschi's control over the construction.
Brunelleschi's solutions were ingenious. The spreading problem was solved by a set of four internal horizontal stone and iron chains, serving as barrel hoops, embedded within the inner dome: one each at the top and bottom, with the remaining two evenly spaced between them. A fifth chain, made of wood, was placed between the first and second of the stone chains. Since the dome was octagonal rather than round, a simple chain, squeezing the dome like a barrel hoop, would have put all its pressure on the eight corners of the dome. The chains needed to be rigid octagons, stiff enough to hold their shape, so as not to deform the dome as they held it together.
Each of Brunelleschi's stone chains was built like an octagonal railroad track with parallel rails and cross ties, all made of sandstone beams 43 centimetres (17 in) in diameter and no more than 2.3 metres (7.5 ft) long. The rails were connected end-to-end with lead-glazed iron splices. The cross ties and rails were notched together and then covered with the bricks and mortar of the inner dome. The cross ties of the bottom chain can be seen protruding from the drum at the base of the dome. The others are hidden. Each stone chain was supposed to be reinforced with a standard iron chain made of interlocking links, but a magnetic survey conducted in the 1970s failed to detect any evidence of iron chains, which if they exist are deeply embedded in the thick masonry walls.[10]
A circular masonry dome, such as that of Hagia Sophia in Istanbul can be built without supports, called centering, because each course of bricks is a horizontal arch that resists compression. In Florence, the octagonal inner dome was thick enough for an imaginary circle to be embedded in it at each level, a feature that would hold the dome up eventually, but could not hold the bricks in place while the mortar was still wet. Brunelleschi used a herringbone brick pattern to transfer the weight of the freshly laid bricks to the nearest vertical ribs of the non-circular dome.[11]
The outer dome was not thick enough to contain embedded horizontal circles, being only 60 centimetres (2 ft) thick at the base and 30 centimetres (1 ft) thick at the top. To create such circles, Brunelleschi thickened the outer dome at the inside of its corners at nine different elevations, creating nine masonry rings, which can be observed today from the space between the two domes. To counteract hoop stress, the outer dome relies entirely on its attachment to the inner dome at its base; it has no embedded chains.[12]
A modern understanding of physical laws and the mathematical tools for calculating stresses was centuries into the future. Brunelleschi, like all cathedral builders, had to rely on intuition and whatever he could learn from the large scale models he built. To lift 37,000 tons of material, including over 4 million bricks, he invented hoisting machines and lewissons for hoisting large stones. These specially designed machines and his structural innovations were Brunelleschi's chief contribution to architecture. Although he was executing an aesthetic plan made half a century earlier, it is his name, rather than Neri's, that is commonly associated with the dome.
Brunelleschi's ability to crown the dome with a lantern was questioned and he had to undergo another competition. He was declared the winner over his competitors Lorenzo Ghiberti and Antonio Ciaccheri. His design was for an octagonal lantern with eight radiating buttresses and eight high arched windows (now on display in the Museum Opera del Duomo). Construction of the lantern was begun a few months before his death in 1446. Then, for 15 years, little progress was possible, due to alterations by several architects. The lantern was finally completed by Brunelleschi's friend Michelozzo in 1461. The conical roof was crowned with a gilt copper ball and cross, containing holy relics, by Verrocchio in 1469. This brings the total height of the dome and lantern to 114.5 metres (375 ft). This copper ball was struck by lightning on 17 July 1600 and fell down. It was replaced by an even larger one two years later.
The commission for this bronze ball [atop the lantern] went to the sculptor Andrea del Verrocchio, in whose workshop there was at this time a young apprentice named Leonardo da Vinci. Fascinated by Filippo's [Brunelleschi's] machines, which Verrocchio used to hoist the ball, Leonardo made a series of sketches of them and, as a result, is often given credit for their invention.[13]
Leonardo might have also participated in the design of the bronze ball, as stated in the G manuscript of Paris "Remember the way we soldered the ball of Santa Maria del Fiore".[14]
The decorations of the drum gallery by Baccio d'Agnolo were never finished after being disapproved by no one less than Michelangelo.
A huge statue of Brunelleschi now sits outside the Palazzo dei Canonici in the Piazza del Duomo, looking thoughtfully up towards his greatest achievement, the dome that would forever dominate the panorama of Florence. It is still the largest masonry dome in the world.[15]
The building of the cathedral had started in 1296 with the design of Arnolfo di Cambio and was completed in 1469 with the placing of Verrochio's copper ball atop the lantern. But the façade was still unfinished and would remain so until the nineteenth century.
The original façade, designed by Arnolfo di Cambio and usually attributed to Giotto, was actually begun twenty years after Giotto's death. A mid-15th century pen-and-ink drawing of this so-called Giotto's façade is visible in the Codex Rustici, and in the drawing of Bernardino Poccetti in 1587, both on display in the Museum of the Opera del Duomo. This façade was the collective work of several artists, among them Andrea Orcagna and Taddeo Gaddi. This original façade was only completed in its lower portion and then left unfinished. It was dismantled in 1587-1588 by the Medici court architect Bernardo Buontalenti, ordered by Grand Duke Francesco I de' Medici, as it appeared totally outmoded in Renaissance times. Some of the original sculptures are on display in the Museum Opera del Duomo, behind the cathedral. Others are now in the Berlin Museum and in the Louvre. The competition for a new façade turned into a huge corruption scandal. The wooden model for the façade of Buontalenti is on display in the Museum Opera del Duomo. A few new designs have been proposed in later years but the models (of Giovanni Antonio Dosio, Giovanni de' Medici with Alessandro Pieroni and Giambologna) were not accepted. The façade was then left bare until the 19th century.
In 1864, a competition was held to design a new façade and was won by Emilio De Fabris (1808–1883) in 1871. Work was begun in 1876 and completed in 1887. This neo-gothic façade in white, green and red marble forms a harmonious entity with the cathedral, Giotto's bell tower and the Baptistery, but some think it is excessively decorated.
The whole façade is dedicated to the Mother of Christ.
The three huge bronze doors date from 1899 to 1903. They are adorned with scenes from the life of the Madonna. The mosaics in the lunettes above the doors were designed by Niccolò Barabino. They represent (from left to right): Charity among the founders of Florentine philanthropic institutions, Christ enthroned with Mary and John the Baptist, and Florentine artisans, merchants and humanists. The pediment above the central portal contains a half-relief by Tito Sarrocchi of Mary enthroned holding a flowered scepter.
On top of the façade is a series of niches with the twelve Apostles with, in the middle, the Madonna with Child. Between the rose window and the tympanum, there is a gallery with busts of great Florentine artists.
The Gothic interior is vast and gives an empty impression. The relative bareness of the church corresponds with the austerity of religious life, as preached by Girolamo Savonarola.
Many decorations in the church have been lost in the course of time, or have been transferred to the Museum Opera del Duomo, such as the magnificent cantorial pulpits (the singing galleries for the choristers) of Luca della Robbia and Donatello.
As this cathedral was built with funds from the public, some important works of art in this church honour illustrious men and military leaders of Florence:
Above the main door is the colossal clock face with fresco portraits of four Prophets or Evangelists by Paolo Uccello (1443). This one-handed liturgical clock shows the 24 hours of the hora italica (Italian time), a period of time ending with sunset at 24 hours. This timetable was used till the 18th century. This is one of the few clocks from that time that still exist and are in working order.
The church is particularly notable for its 44 stained glass windows, the largest undertaking of this kind in Italy in the 14th and 15th century. The windows in the aisles and in the transept depict saints from the Old and the New Testament, while the circular windows in the drum of the dome or above the entrance depict Christ and Mary. They are the work of the greatest Florentine artists of their times, such as Donatello, Lorenzo Ghiberti, Paolo Uccello and Andrea del Castagno.
Christ crowning Mary as Queen, the stained-glass circular window above the clock, with a rich range of coloring, was designed by Gaddo Gaddi in the early 14th century.
Donatello designed the stained-glass window (Coronation of the Virgin) in the drum of the dome (the only one that can be seen from the nave).
The beautiful funeral monument of Antonio d'Orso (1323), bishop of Florence, was made by Tino da Camaino, the most important funeral sculptor of his time.
The monumental crucifix, behind the Bishop's Chair at the high altar, is by Benedetto da Maiano (1495–1497). The choir enclosure is the work of the famous Bartolommeo Bandinelli. The ten-paneled bronze doors of the sacristy were made by Luca della Robbia, who has also two glazed terracotta works inside the sacristy: Angel with Candlestick and Resurrection of Christ.
In the back of the middle of the three apses is the altar of Saint Zanobius, first bishop of Florence. Its silver shrine, a masterpiece of Ghiberti, contains the urn with his relics. The central compartment shows us one his miracles, the reviving of a dead child. Above this shrine is the painting Last Supper by the lesser-known Giovanni Balducci. There was also a glass-paste mosaic panel The Bust of Saint Zanobius by the 16th century miniaturist Monte di Giovanni, but it is now on display in the Museum Opera del Duomo.
Many decorations date from the 16th-century patronage of the Grand Dukes, such as the pavement in colored marble, attributed to Baccio d'Agnolo and Francesco da Sangallo (1520–26). Some pieces of marble from the facade were used, topside down, in the flooring (as was shown by the restoration of the floor after the 1966 flooding).
It was suggested that the interior of the 45 metre (147 ft) wide dome should be covered with a mosaic decoration to make the most of the available light coming through the circular windows of the drum and through the lantern. Brunelleschi had proposed the vault to glimmer with resplendent gold, but his death in 1446 put an end to this project, and the walls of the dome were whitewashed. Grand Duke Cosimo I de' Medici decided to have the dome painted with a representation of The Last Judgment. This enormous work, 3,600 metres² (38 750 ft²) of painted surface, was started in 1568 by Giorgio Vasari and Federico Zuccari and would last till 1579. The upper portion, near the lantern, representing The 24 Elders of Apoc. 4 was finished by Vasari before his death in 1574. Federico Zuccari and a number of collaborators, such as Domenico Cresti, finished the other portions: (from top to bottom) Choirs of Angels; Christ, Mary and Saints; Virtues, Gifts of the Holy Spirit and Beatitudes; and at the bottom of the cuppola: Capital Sins and Hell. These frescoes are considered Zuccari's greatest work. But the quality of the work is uneven because of the input of different artists and the different techniques. Vasari had used true fresco, while Zuccari had painted in secco. During the restoration work ended in 1995, the entire pictorial cycle of the The Last Judgment was photographed with specially designed equipment and all the information collected in a catalogue. All the restoration information along with reconstructed images of the frescos were stored and managed in the Thesaurus Florentinus computer system [16][17].
The cathedral underwent difficult excavations between 1965 and 1974. The subterranean vaults were used for the burial of Florentine bishops throughout the centuries.
Recently the archaeological history of this huge area was reconstructed: remains of Roman houses, an early Christian pavement, ruins of the former cathedral of Santa Reparata and successive enlargements of this church. Close to the entrance, in the part of the crypt open to the public, is the tomb of Brunelleschi. While its location is prominent, the actual tomb is simple and humble. That the architect was permitted such a prestigious burial place is proof of the high esteem he was given by the Florentines.
Also buried in the former cathedral of Santa Reparata was Conrad II of Italy.
|